For use in a variety of environments, the Dragino LTC2 Industrial LoRaWAN Temperature Transmitter is intended to monitor temperature. It can read PT100 probe data, translate it to temperature, and then use the LoRaWAN protocol to uplink the data to an IoT server.
LTC2 has datalog functionality. Using a LoRaWAN downlink command, the user can obtain the sensor value.
For extended time measurement, an 8500mA Li-SOCI2 battery powers the LTC2. Depending on the operating mode and network environment, the battery has a 2–10 year lifespan.
Every LTC2 is equipped with a pair of internal 16-bit ADC interfaces, calibrated using 12-set resistors to provide accurate measurements throughout a broad range.
LoRaWAN v1.0.3 is compatible with LTC2. Pre-loaded with a set of distinct keys for LoRaWAN registration, each LTC2 will automatically establish a connection at power-up by registering these keys with the local LoRaWAN server.
FEATURES
- LoRaWAN v1.0.3 Class A
- max: 2 x monitor temperature channels
- Support 3-wire PT-100
- 8500mAh Li-SOCI2 Battery
- Firmware upgrade via console
- Wall Mountable
- Configurable via LoRa or UART
- Datalog and retrieve via LoRaWAN
- Use pre-load PT100 probe or 3rd PT100 probe
- Factory calibration for different resistance ranges
- Support accuracy measure of resistance and upload
- Battery Monitoring and upload
APPLICATIONS
- Logistics and Supply Chain Management
- Food management.
- Cold chains solution
- Industrial Monitoring and Control
SPECIFICATIONS
|
Environment |
Operating Temperature | -40 ~ 85°C |
| Storage Temperature | -40 ~ 85°C | |
| Protection Level | IP66 |
Sensor accuracy
| Temperature Sensor | Temperature range | For FSA model : -50 ~ 200 °C |
| Accuracy | Resolution: 0.01°C
Accuracy: 0 ~ 80°C ± 0.5°C |
|
| Cable length | 2Meter |
DOCUMENT
SHIPPING LIST
- 1 x LTC2-FSA Food Safety Version Industrial LoRaWAN Temperature Transmitter
There are no reviews yet.