If you are familiar with our product, you will find there is waterproof temperature sensor named DS18B20. This waterproof temperature sensor kit is using the same probe—DS18B20 probe AS . It contains a probe with a resister module. So it is easy to connect on the Arduino board.
The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
SPECIFICATION
- Operating voltage: 3.0~ 5.5V
- ±0.5°C Accuracy from -10°C to +85°C
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- 9 to 12 bit selectable resolution
- Uses 1-Wire interface- requires only one digital pin for communication
- Unique 64 bit ID burned into chip
- Multiple sensors can share one pin
- Temperature-limit alarm system
- Query time is less than 750ms
- 3 wires interface:
Type A
- Red wire – VCC
- Black wire – GND
- Yellow wire – DATA
Type B
- Red wire – VCC
- Yellow wire – GND
- Green wire – DATA
- Stainless steel tube 6mm diameter by 35mm long
- Cable diameter: 4mm
- Length: 90cm
DOCUMENTATIONS
SHIPPING LIST
- 1 x Waterproof DS18B20 Digital temperature sensor
- 1 x Terminal sensor adapter
- 1 x Digital sensor cable