As a 2.4-inch TFT display module with a resolution of 240 * 320, it uses the SPI interface for communication. LCD has an internal controller with basic functions, which can be used to draw points, lines, circles, and rectangles, and can display English, Chinese as well as pictures. We provide complete supporting Raspberry Pi demos (BCM2835 library, WiringPi library, and Python demos), STM32 demos, and Arduino demos.
- 2.4″ LCD DISPLAY MODULE
- Embedded ILI9341 Driver, Using SPI Bus
- Comes with examples of Raspberry Pi, Arduino, STM32, etc.
FEATURES
- 240×320 resolution, 65K RGB colours, clear and colourful displaying effect
- SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Arduino/STM32
- Comes with development resources (examples for Raspberry Pi/Arduino/STM32)
SPECIFICATION
OPERATING VOLTAGE | 3.3V/5V | RESOLUTION | 240 × 320 pixels |
---|---|---|---|
COMMUNICATION INTERFACE | 4-wire SPI | DISPLAY SIZE | 36.72 × 48.96mm |
DISPLAY PANEL | TFT | PIXEL SIZE | 0.153 × 0.153mm |
DRIVER | ILI9341 | DIMENSIONS | 70.50 × 43.30mm |
Controlled Via SPI Bus
Supports Controller Boards Like Raspberry Pi/Arduino/STM32
VCC | Power (3.3V/5V input) |
---|---|
GND | Ground |
DIN | SPI data input |
CLK | SPI clock input |
CS | Chip selection, low active |
DC | Data/Command selection (high for data, low for command) |
RST | Reset, low active |
BL | Backlight |
Hardware Connection
Connecting With Raspberry Pi
Connecting With Arduino Board
Living Example
Outline Dimensions
DOCUMENT
SHIPPING LIST
- 1 x Waveshare 2.4inch LCD Module
- 1 x Jumper Wire