Because the ESP32-S2 is a new product, the ecosystem and support are still developing. It is not suitable for novices. Consider the NodeMCU-ESP32 or the T-Display.

LILYGO® TTGO T8 ESP32-S2 V1.1 ST77789 1.14 Inch LCD Display WIFI Wireless Module is what you’re looking for. It is powered by an ESPRESSIF-ESP32-S2 chipset. The ESP32-S2 is a genuinely secure, highly integrated, low-power 2.4 GHz Wi-Fi Microcontroller SoC with 43 GPIOs that support Wi-Fi HT40.

SPECIFICATIONS

• Hardware:
  • Chipset: ESPRESSIF-ESP32-S2
  • FLASH: 4MB
  • PSRAM: 8MB
  • SRAM: 320 kB SRAM
  • Button: Power switch, reset, boot, customize, SMD DPI switch
  • External Device: TF Card
  • USB to TTL: CH340C
  • Modular interface: SD card, UART, SPI, I2C, PWM, I2S, ADC
  • On-board clock: 32.768KHz crystal oscillator
  • Working voltage: 2.7V-3.6V
  • Working temperature range: -40℃ ~ +85℃
  • Weight: 9g
  • Size: 65.48*26.02*5mm
• Power Supply:
  • Power supply input: USB 5V/1A
  • Charging current: 500mA
  • Battery input:  3.7-4.2V
  • JST connector: 2Pin 1.25mm
  • USB: Type-C USB
• Wi-Fi:
  • Standard: FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)
  • Protocol: 802.11 b/g/n(802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection interval
  • Frequency range: 2.4GHz~2.5GHz(2400M~2483.5M)
  • Transmit power: 22dBm
  • Communication distance: 300m
• Display:
  • Screen: ST77789 / 1.14 inch

PINOUT DIAGRAM

DOCUMENT

• Datasheet – ESP32-S2

NOTED

• This board comes WITHOUT pre-soldered header pins

SHIPPING LIST

• 1 x T8 ESP32-S2 V1.1 board
• 1 x Charging cable
• 2 x 20-pin headers