Arduino Relay Shield employs high quality SONGLE relay with two-channel input and output. It can be connected to 250V/10A AC element or 24V/10A DC element to the maximum. Therefore, it can be used to control lights, motors and others. It is active at LOW level. The modularized design makes it easy to connect to Arduino expansion board. The output state of the relay is shown by a LED for the convenience of actual application.
SPECIFICATIONS
- Control signal: TTL voltage Active at LOW level
- Rated load:
- 10A 250VAC
- 10A 125VAC
- 10A 30DC
- 10A 28VDC
- Rated Through-current: 10A(NO) 5A(NC)
- Max Switching Voltage: 250VAC 30VDC
- Contact actuation time: ﹤10ms
Definition of module pins:
- i) Pin 1- Pin 2—-Controlling end
- ii) Power supply (VCC)
- iii) Ground (GND)
DOCUMENTATIONS
SHIPPING LIST
- 1 x 2 Channel Relay 5V Module for Arduino
There are no reviews yet.