FEATURES

• No moving parts, low wear and long service life.
• Engineering plastic shell, light and handy design, easy to carry.
• The filtering algorithm makes the measurement more accurate.
• LED display, high-definition data display, easy to read at a glance.
• Expert mode/simple mode: In the expert mode, other functions can be set; in the easy mode, the product configuration can be quickly completed by a 2-step setting and put into use.

SPECIFICATIONS

• Name: Ultrasonic level sensor
• Model No. : JXBS-3001-CSB-YWJ-RS 0-10
• Communication mode: RS485
• Power supply: 12-24V power supply
• Measuring range: 0-10 m
• Measurement principle: ultrasonic wave
• Material: ABS
• Installation: non-contact type
• Suitable place: Suitable for a variety of working conditions, tank, lake, acid and alkali pool and other corrosive liquid
• Operating temperature: -20~+60℃
• Working humidity environment: 0~100%RH (15~95%RH)

Attention

Please check whether the package is intact and whether the transmitter model and specifications are consistent with the products you choose; If you have any questions, please contact us as soon as possible.

Please confirm before use: the power supply output voltage is correct; as The positive and negative wiring modes of the power supply and the product; read the product instructions or consult our company. Any error in wiring will cause irreversible damage to the transmitter.

FAQs

1. Password management: You can open the password function according to your needs. The initial password is 0000, which can be opened and changed by yourself. The alternate password
2. Range management: This item is delivered according to the range purchased by the user. If the user restores the factory Settings by himself, it needs to be adjusted according to the purchased product parameters.
3. Measurement mode: It can switch the object level mode and liquid level mode.
4. How does the water level sensor work?: The principle of static pressure measurement: when the liquid level transmitter is put into a certain depth of the liquid under test, the pressure formula of the sensor against the liquid level is as follows: rho = rho. g.HPo formula: Pressure on.                                                    P: transmitter against liquid level
   ρ: measured liquid density
   g: local gravity acceleration
   Atmospheric pressure on Po: surface
   Depth of H: transmitter into liquid
   Meanwhile, the pressure of the liquid is introduced into the positive pressure chamber of the sensor through the gas conduction stainless steel, and the atmospheric pressure Po on the liquid level is connected with the negative pressure chamber of the sensor to counteract the Po, on the back of the sensor
   The pressure measured by the sensor is ρ.g.H the depth of liquid level can be obtained by measuring the pressure P.
5. What are the types of water level sensors?:  It is divided into two categories: one is contact type, including single flange differential pressure liquid level sensor, float liquid level sensor, magnetic liquid level sensor, input liquid level sensor, electric inner float liquid level sensor, electric float liquid level sensor, electronic water level gauge, magnetostrictive liquid level sensor, servo liquid level sensor, etc. The second category is non-contact, divided into the ultrasonic liquid level sensor, radar liquid level sensor, and so on.

• 1 x Ultrasonic level sensor – 485 ultrasonic level meter 0-10M