HW-040 Rotary Encoder Module

RM6.90

Hurry, only 5 left.
Compare
SKU: MYP-JHS-364 Category:
Description

The HW-040 rotary encoder module is a device that creates an electrical signal dependent on the amount and direction of rotation of the rotary input device (knob). It is a position sensor with a knob that may be used to precisely regulate stepper or servo motors.

The HW-040 rotary encoder module is a rotary encoder intended for use in electrical circuits and systems. A rotary encoder is a sensor that detects the position of a spinning shaft. The HW-040 module normally has three pins: VCC, GND, and Signal.

It creates a pulse train output with the number of pulses determined by the number of encoder detents. The amount of pulses per revolution varies according to the encoder, although it is typically between 20 and 24 pulses each revolution. This enables accurate position detection and rotational control of the shaft.

SPECIFICATION

  • Model: HW-040
  • Working voltage: 5V
  • Material: PCB + Brass
  • Mechanical angle: 360 Degrees
  • Output: 2-bit gray code
  • Positions per revolution: 30
  • Weight: 10g
  • Size: 32 x 19 x 30mm

PINOUT 

The HW-040 module has 5 output pins. Two of these are for the power of the module whereas, 3 are for the output data of the turns and direction of the knob. The table below describes the pin type and the function of each pin in the Rotary module.

Pin Type Description
CLK Encoder Pin A
DT Encoder Pin B
SW No push-button switch
VCC(+) Voltage input(+5V)
GND Ground(Encoder Pin C)

The HW-040 rotary encoder module is a sensor that detects the position of a rotating shaft. The HW-040 rotary encoder module is commonly used for the following applications:

  • Motor control: The HW-040 module may be used to control the speed and position of motors in a variety of applications such as robots, CNC machines, and other equipment that requires accurate rotational control of the motor.
  • Volume control: The HW-040 module may be used to precisely regulate the volume or brightness of electronic devices such as sound systems, televisions, and other devices that require accurate volume or brightness control.
  • Robotics: The HW-040 module may be utilized in robots for accurate position sensing and movement control.
  • Industrial Automation: The HW-040 module can be used in industrial automation systems for precise position sensing and control of the machine’s movement.
  • Human-machine Interface: The HW-040 module can be used in a variety of human-machine interface applications such as in control panels, instrumentation, and other applications where precise position sensing is required.
  • Other applications: The HW-040 module can be used in other applications that require precise position sensing and control of a rotating shaft such as in gaming machines, medical equipment, and other applications.

SHIPPING LIST

  • 1 x HW-040 Rotary Encoder Module
Reviews (0)
0 ★
0 Ratings
5 ★
0
4 ★
0
3 ★
0
2 ★
0
1 ★
0

There are no reviews yet.

Be the first to review “HW-040 Rotary Encoder Module”

Your email address will not be published. Required fields are marked *

Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping