If you need to connect a DC power wall wart to a board that doesn’t have a DC jack, use this female DC jack to screw the terminal converter. It’s a normal 2.1mm female head that connects to a male DC jack. You just screw your cable into the rear without splicing or crimping and connect it in. To minimize misunderstanding, the terminals are labeled with positive and negative terminals.

SPECIFICATIONS

• Compatible with many DC wall power supplies
• Connector Dimensions: 5.5mm (0.2″) jack, 2.1mm (0.08″) center pin diameter
• Outer Dimensions: 35.3mm (1.39″) length x 13.5mm (0.53″) width x 11.3mm (0.44″) height
• Weight: 6.3g (0.22oz)
• Power: 12V~36V
• Application: CCTV camera, Power, LED and etc
• Durability: over 1000 times
• Material: Plastic and Copper
• Working temperature: -20°C ~ 75°C
• Storage temperature: -30°C ~ 85°C
• Humidity: 0% ~ 95% RH

SHIPPING LIST

• 1 x DC Jack 2.1mm Female Terminal Block