TrackerD-LS is an open-source LoRaWAN Asset Tracker based on ESP32 MCU and Semtech LoRa Wireless Chip. It can get the location data via GPS and set it to an IoT server via the LoRaWAN network.
TrackerD-LS supports Motion Detection, when there is motion, TrackerD-LS can send data more frequently and it will save power when no motion is detected.
The LoRa wireless technology used in TrackerD-LS allows the user to send data and reach extremely long ranges at low data rates. It provides ultra-long-range spread spectrum communication and high interference immunity while minimizing current consumption. It targets professional tracking services.
When there is no LoRaWAN network, TrackerD-LS can save the location data. It will send these data to the IoT server when is LoRaWAN network covered.
TrackerD-LS is equipped with a 3000mAh Li-on rechargeable battery + Solar Panel which allows the device to be used for many years. Each TrackerD-LS has a worldwide unique OTAA key to join the LoRaWAN network.
TrackerD-LS is program friendly. Developers can use Arduino IDE to customize the software of TrackerD-LS to fit their IoT solution.
FEATURES
- LoRaWAN 1.0.3 Class A
- ESP32 PICO D4
- SX1276/78 Wireless Chip
- Arduino IDE Compatible
- Open-source hardware/software
- Regular/ Real-time GPS tracking
- Built-in 3 axis accelerometer.
- Motion sensing capability
- Power Monitoring
- Charging circuit via USB port
- 3000mA Rechargeable Li-on Battery + Solar Panel
- Datalog
APPLICATIONS
- Logistics and Supply Chain Management
SPECIFICATIONS
MicroController:
- Espressif ESP32 PICO D4
- MCU: ESP32 PICO D4
- Integrated SPI flash: 4 MB
- RAM: 448 KB
- EEPROM: 520 KB
- Clock Speed: 32Mhz
Common DC Characteristics:
- Supply Voltage: 2.5v ~ 3.6v
- Operating Temperature: -40 ~ 60°C
LoRa Spec:
- Frequency Range, 168 dB maximum link budget.+20 dBm – 100 mW constant RF output vs.
- Band 1 (HF): 862 ~ 1020 Mhz
- +14 dBm high-efficiency PA.
- Programmable bit rate up to 300 kbps.
- High sensitivity: down to -148 dBm.
- Bullet-proof front end: IIP3 = -12.5 dBm.
- Excellent blocking immunity.
- Low RX current of 10.3 mA, 200 nA register retention.
- Fully integrated synthesizer with a resolution of 61 Hz.
- FSK, GFSK, MSK, GMSK, LoRaTM, and OOK modulation.
- Built-in bit synchronizer for clock recovery.
- Preamble detection.
- 127 dB Dynamic Range RSSI.
- Automatic RF Sense and CAD with ultra-fast AFC.
- Packet engine up to 256 bytes with CRC.
- LoRaWAN 1.0.3 Specification
Battery:
- 3000mA Li-on Battery power
- Built-in Solar Panel
Power Consumption:
- Sleeping Mode: 60uA
- LoRa Transmit Mode: 125mA @ 20dBm 44mA @ 14dBm
- Tracking: max: 38mA
Documents
SHIPPING LIST
- 1 x Dragino TrackerD-LS LoRaWAN Asset Tracker
There are no reviews yet.