Description

If you are familiar with our product, you will find there is waterproof temperature sensor named DS18B20. This waterproof temperature sensor kit is using the same probe—DS18B20 probe AS . It contains a probe with a resister module. So it is easy to connect on the Arduino board.

The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.

SPECIFICATION

  • Operating voltage: 3.0~ 5.5V
  • ±0.5°C Accuracy from -10°C to +85°C
  • Usable temperature range: -55 to 125°C (-67°F to +257°F)
  • 9 to 12 bit selectable resolution
  • Uses 1-Wire interface- requires only one digital pin for communication
  • Unique 64 bit ID burned into chip
  • Multiple sensors can share one pin
  • Temperature-limit alarm system
  • Query time is less than 750ms
  • 3 wires interface:

Type A

  • Red wire – VCC
  • Black wire – GND
  • Yellow wire – DATA

Type B

  • Red wire – VCC
  • Yellow wire – GND
  • Green wire – DATA
  • Stainless steel tube 6mm diameter by 35mm long
  • Cable diameter: 4mm
  • Length: 90cm

DOCUMENTATIONS

SHIPPING LIST

  • 1 x Waterproof DS18B20 Digital temperature sensor
  • 1 x Terminal sensor adapter
  • 1 x Digital sensor cable
Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping