NVidia has chosen to reintroduce the Jetson Nano B01 Developer kit at a higher cost. The Jetson Nano 2GB, Xavier NX, and AGX Xavier, on the other hand, are EOL (End Of Life). When selecting a microSD card for the Developer Kit, we recommend that you choose a Class A1 microSD card for faster random read and write speeds. This is to ensure that the processing system runs smoothly and without errors.

This 64GB MicroSD with JetPack for Jetson Nano is a wonderful pick! The Non-Production System on Module (SoM) is included with the Official NVidia Jetson Nano B01 Dev kit. It is intended for development purposes only, not for production deployment.NVidia does not advocate using this dev kit for 24 hours or in industrial temperatures. Please obtain the dev kit with production SoM for production deployment:

• reComputer Jetson Nano 4GB Advanced Dev Kit
• reComputer Jetson Nano 4GB Dev Kit

SPECIFICATIONS

NVIDIA Jetson Nano Developer Kit Rev.B01

• Jetson Nano Rev: B01
• Non-production System on Module, strongly NOT recommended for deployment. Only for training and development.
• GPU: 128-core Maxwell™ GPU
• CPU: Quad-core ARM A57
• Memory: 4 GB 64-bit LPDDR4 25.6 GB/s
• Storage: MicroSD slot on the SoM (Please choose the kit for the microSD with Jetpack)
• Video Encoder: 4Kp30| 4x 1080p30| 9x 720p30 (H.264/H.265)
• Video Decoder:4Kp60| 2x 4Kp30| 8x 1080p30| 18x 720p30| (H.264/H.265)
• Power input:
  • Micro-USB 5V, low power mode
  • DC Power 5V 2.1mm DC Barrel, upto 4A, high power mode
• Camera: 2 x MIPI CSI-2 DPHY lanes
• Connectivity: Gigabit Ethernet, M.2 Key E expansion connector (Recommendation: AC8265 Dual-mode NIC)
• Display: HDMI and DP
• USB:
  • 4 x USB 3.0
  • USB 2.0 Micro-B
• Extension interface:
  • GPIO
  • I2C
  • I2S
  • SPI
  • UART
• Fan connector
• PoE connector
• Dimensions: 100mm x 80mm x 29mm

5V 4A DC Jack 2.1mm Universal Power Adapter – UK-EU-US Plug

• Output:
  • Output voltage: +5.0V DC
  • Nominal load current: 4A
  • Maximum power: 20W
  • Protection:
    • Short circuit protection
    • Overcurrent protection
  • Efficiency: 82%
  • Output cable: 1500±50mm UL2464 20AWG
  • Output connector: DC Jack 2.1mm
• Input:
  • Voltage range: 100-240VAC (rated)
  • Frequency: 50/60Hz
  • Current: 0.6A maximum
  • Power consumption (no load): 0.1W maximum

 Raspberry Pi 8MP Camera Module V2.1

• Sony IMX219 chip, CSI interface
• 8MP, 1080P resolution
• Wide range of applications
• Compatible with Acrylic Case Holder for Camera Module
• Connects to the Nvidia Jetson Nano via a short ribbon flexible cable (included)

AC8265 Wireless Module 

• No driver installation is needed, plug and use
• Supports 5G/2.4G dual-band wifi
• IEEE 802.11ac
• Supports Bluetooth / WiFi dual mode
• Superior quality, coupled with two 3db large gain antennas, transmission speed up to 867Mbps
• The antenna can be rotated within 90°, the user can adjust the angle to improve signal sensitivity
• Compatible with NVIDIA Jetson Nano B01 and A02
• Compatible with the acrylic case, two antennas can be fixed on the case too.

Clear Acrylic Case with  Cooling Fan

• Mounting holes for two external antennas of the Wireless Network Card
• Support fixing of two camera brackets
• Supports cooling fan with anti-reverse connection
• Clever opening design, easy access to the peripheral connectors
• DIY (Do It Yourself) case
• Take around 5 to 10 minutes to assemble

Clear Acrylic Camera Mount

• Acrylic case for RPi and Jetson Nano Camera Modules
• DIY (Do It Yourself) case
• Easy installation
• Four Screws and nuts are included to secure your camera
• 2 in 1 camera case and holder
• Can be fixed on Jetson Nano acrylic case

DOCUMENT

• Wiki
• Jetson Nano: Deep Learning Inference Benchmarks
• Get Started with Jetson Nano Developer Kit
• RPi Camera Datasheet

PACKAGING LIST

• 1 x NVIDIA Jetson Nano Developer Kit Rev.B01
• 1 x 5V 4A DC Jack 2.1mm Universal Power Adapter – UK-EU-US Plug
• 1 x Clear Acrylic Case with  Cooling Fan
• 1 x Clear Acrylic Camera Mount
• 1 x Raspberry Pi 8MP Camera Module V2.1
• 1 x AC8265 Wireless Module